Material on this website: copyright 1997-2012. It may be
printed for your personal use but may not be used for commercial purposes,
copied, or altered and posted on other websites
Just click the box on the left for the item(s) you wish to purchase and
then press the nearest 'add to cart' button. Once in your cart, you can
change the quantity you wish to purchase. For items sold by the foot
(such as Phillystran cable), change the quantity to indicate how many feet you
wish to purchase.
Note that the shopping cart is not exactly accurate on shipping prices. It
can estimate low and some cases high. Usually it is very close but it
may not match.
Order
Description
Price
PPC, Linear, and Radio Cables
Optional Cables See the
Cable Page to configure your radio
CAT-Y All radios except ICOM
for computer control
$15.00
CAT-1 Yaesu MP/2K/9K freq data
(FT1K-1 for FT-1K/D)
$35.00
CAT-4 Yaesu MP/2K/9K CAT/QSK/Auto
Power On
$80.00
CAT-2 Kenwood frequency data
$35.00
CAT-3 TenTec, Elecraft
frequency data
$35.00
TS2K-1
TS2000/850/870S/570S/TS-590S PTT & ALC Relay Switching
Note: If you have a TS-590, Kenwood has issued a new
firmware version that resolves issues with leading edge power spikes when
transmitting that can damage an external amplifier. See the Kenwood notice
here:
Note: If you have a TS-590, Kenwood has issued a new
firmware version that resolves issues with leading edge power spikes when
transmitting that can damage an external amplifier. See the Kenwood notice
here:
$45.00
TS480-1
TS-480 PTT/ALC Relay Switching
$35.00
TS480-2
TS-480 PTT/ALC Solid-State Switching
$45.00
TS850-1
TS-850 frequency data
$35.00
FT-1K
Yaesu FT-1K/MP/2K/9K for High Speed QSK CW
$35.00
FT-2
Yaesu FT897 Band Data/Amp Enable
$40.00
FT-3
Yaesu FT897 / FT857 ALC Only Cable (use
with FT4 for PTT)
$25.00
FT-4Yaesu
FT897 / FT857 PTT Only Cable (use with FT-3 for ALC)
$35.00
FT1K-1
Yaesu FT-1000/D Frequency Data Cable
$35.00
PRO-1
ICOM band data (All ICOM Radios)
$30.00
IC7K-1
ICOM 706/718/7000 Amp interface
$35.00
K3SPE K3 Band
Data & ALC to SPE amp
$50.00
K3THP1 Elecraft K3 ALC
and band data cable for HL-1.5KFX
$35.00
K3THP2 Elecraft K3 ALC
and band data cable for HL-2.5KFX
$35.00
K3-Y K3 ACC HD15
splitter cable
$15.00
K3ALC Elecraft K3
ALC only
$35.00
Flex-1500_PTT Cable - connects your Flex 1500 to THP HL45B - *PTT ONLY*
$45.00
Acom
Amplifiers and Accessories
Order
Description
Price
Acom 2000A
- Legal Limit Fully Automatic Amplifier - 160 - 10m QSK Capable - the
standard setter
$6850.00
NEW!
Acom 1500 - 1500w PEP (1200 Carrier modes) 160 - 6m - QSK FCC Approval Pending - we will not accept orders
until approval is received
$4750.00
Acom 800S - Solid State 800w Amplifier - 160 through 6m,
800w output, up to 3:1 SWR - ** Coming Soon **
~3500.00
Acom 1000 - 1kw - 160 thru 6m - QSK Capable
$3250.00
Acom 1010 - 800w - 160 thru 10m
$2340.00
Acom 1011 - 700w - 160 thru 10m
$2240.00
Acom 2S1 - XCVR Commutator
$295.00
RPON - Remote Power On Module for Acom 2000A
$150.00
2000AFAN - External Fan for 2000A (not needed for normal
operation - only if used in broadcast or extended high duty cycle
operation - e.g. RTTY Bulletin transmissions)
$125.00
Matched pair of NOS (New Old Stock) 4CX800 tubes for Acom 2000A (Single
tubes available for $350 each - please call)
AIM
UHFDXAntenna Analyzer with 100V to 260v 50/60Hz Power Supply
with global adapters, USB
Cable, and calibration loads. Protective case not included, please order it below
$919.00
AIM
UHFAntenna Analyzer with 120V 60Hz Power Supply for use
in USA, USB Cable, and calibration loads. Protective case not included, please order it below
$895.00
AIM
UHF Antenna Analyzer with USB Cable, calibration loads no
Power Supply. Protective case not included, please order it below
$890.00
AIM-PC Protective Case with professional foam
insert
$39.00
GPS-12R1A - 12V DC 1 amp REGULATED Power supply with
global plug adapters - 6ft cord with proper plug - RF quiet
$29.95
New! 12V 5AH SLA
Battery for making portable measurements with your AIM4170C
$29.00
New! 12V Universal
Battery Charger for 5AH SLA Battery above (100 to 260v 50/60Hz
capable)
$29.00
New! AIM-PRO Case -
Protect your AIM and carry the new 12V 5AH Battery, charger, load sets and
other accessories
** Note the battery and charger are not included in
the cost of the Pro Case **
$89.00
PS-9 - 9V DC Replacement Power Supply for AIM
UHF - 6ft cord with proper plug - for USA - 120v/60Hz only. (same as
originally supplied with the AIM4170 and AIMUHF)
$9.00
Aim 4170C Lab and Field Grade
VIA
AIM 4170CDX
Antenna Analyzer with 100 to 260V 50/60 Hz Global Power Supply with
plug adapters and calibration loads. Protective case not included, please order it below
$569.00
AIM 4170C
Antenna Analyzer with 110V Power Supply and calibration loads. Protective case not included, please order it below
$545.00
AIM 4170C Antenna Analyzer with calibration loads but without
Power Supply. Protective case not included, please order it below
$540.00
Type-N connector Option type-N DUT & type-N calibration
loads will be included instead of PL-259 load set.
$35.00
USB Adapter and cable to AIM 4170C (XP and
earlier)
AIM-PC Protective Case with professional foam
insert
$39.00
New! 12V 5AH SLA
Battery for making portable measurements with your AIM4170C
$29.00
New! 12V Universal
Battery Charger for 5AH SLA Battery above
$29.00
New! AIM-PRO Case -
Protect your AIM and carry the new 12V 5AH Battery, charger, load sets and
other accessories
** Note the battery and charger are not included in
the cost of the Pro Case **
$89.00
PS-9 - 9V DC Replacement Power Supply for AIM - 6ft cord with proper plug - for USA
- 120v/60Hz only. (same as originally supplied with the AIM4170 and AIMUHF)
$9.00
AS-PLS-U Precision calibration load set
PL259 (for more precise over 100MHz calibration use)
$80.00
AS-PLS-N Precision calibration load
set Type-N
No longer available. The Type N load sets now included
with our Analyzers (4170, UHF, & VNA2180) are now rated up to 1 GHz.
The AIM4170C requires one interface cable choose either USB or
RS232
Power Aim 120 Commercial
Broadcast VIA
PowerAim
120 professional broadcast antenna analyzer kit:
AM, SW, FM, VHF TV
(to 180 MHz) -
includes protective "Pro Case" case for the analyzer, 12v DC power cord, battery, battery charger, room for
your adapters, and one set of standard loads (not precision, see
below) See optional power supplies below.
$2,995.00
PA-USB II rugged USB/RS232 for WinXP only
(includes one 6' RS232 extension cable)
PS-12R1A - 12V DC 1 amp LINEAR & REGULATED Power supply 120V AC
60Hz Only - 6ft cord with proper plug - RF quiet for USA
$19.00
GPS-12R1A - 12V DC 1 amp REGULATED Power supply with
global plug adapters - 6ft cord with proper plug - RF quiet 100v-250v
50/60Hz
$29.95
VNA 2180 Vector Network
Analyzer
Price
VNA-2180 Vector Network Analyzer -
includes type-N standard load set, Power supply (120V AC), power cable,
two test cables, USB to USB cable
$1,495.00
VNA-2180DX Vector Network
Analyzer - includes type-N standard load set, Global Power supply
(100-250VAC 50/60Hz), power cable, two test cables, USB to USB cable
$1,524.00
VNA-PC Protective Case for your VNA-2180 with
room for loads, PS, cables
Phase Shifter
180 degrees Mono Band SO239 standard
Requires a .5 WL Coaxial Delay line (please call or email for quote on
delay line)
$195.00
Dual Feedline Option with Type N Connectors (For use with StackMatch - allows use
of 2nd [or 3rd] stacked antenna with another radio for multi-op or
SO2R)
$145.00
Mini StackMatch, 3 kW 2 antenna port StackMatch without relays
(SO239)
$160.00
Mini StackMatch, 3 kW 3 antenna port StackMatch without relays
(SO239)
$170.00
Mini StackMatch, 5 kW 2 antenna port StackMatch without relays
(SO239)
$275.00
Mini StackMatch, 5 kW 3 antenna port StackMatch without relays
(SO239)
$285.00
6 Meter StackMatches & Controllers
6 Meter StackMatch (7-60 MHz) - requires a controller
$247.00
Rotary Switch LED Controller for 6M 3-antenna StackMatch
$66.00
6 Meter StackMatch II (7-60 MHz) - requires a controller
Array Solutions Gift Card $100 increment value - Nicely
printed Card
no expiration date, full value, sent to you via Expedited UPS if specified
world wide.
$100.00
Cards can be redeemed for Cash back if item ordered is
less then the value of the card. For example if a $500 gift card is
used to buy a $300 item we will send a check or issue credit card
credit for $200 when the gift card is used.
W1JR-50-1DIN 1:1 Balun 10KW CW/20 KW PEP, 7/16 DIN connector
1.8-30 MHz
Heavy duty Balun
$177.00
4:1 200 Ohm Baluns
AS-200-3 4:1 Balun 5 kW
CW/10KW PEP standard 3.5 - 60 MHz
$91.00
AS-200-3N 4:1 Balun 5 kW
CW/10KW PEP 3.5 - 60 MHz, N connector
$94.75
AS-200-1 4:1 Balun 5 kW
CW/ 10KW PEP 1.8 - 30 MHz Heavy duty core
and windings SO239
standard other connectors available
$126.00
AS-200-T (Tuner) 4:1 Balun 5 kW
CW/10KW PEP - 1.5 - 30 MHz, Heavy duty cores and 15KV
windings - The Tuner Balun for multi-band dipoles, verticals, loops, OCF, & ladder
line fed antennas - SO239 standard other connectors available - specify in
the comment area of the order
$140.00
AS-200-T-UN (Tuner
UN-UN) 4:1 UNUN 5 kW
CW/10KW PEP - 1.5 - 60 MHz, Heavy duty cores and 20KV
windings - The Tuner UNUN for multi-band verticals with radials - SO239 standard
other connectors available
$140.00
AS-200-T-10K 4:1 Balun 10 kW
CW/20 KW PEP - 1.5 - 30 MHz, Heavy duty cores and 20KV
windings - The BIG AMP Tuner Balun for multi-band dipoles, loops, OCF, & ladder
line fed antennas - 7/16DIN standard other connectors available
EB-2-OB 1:1 3 kW EB-2 Balun for OptiBeams Cal AV Labs
(Do not
order this model unless it is for replacing the same model on an OptiBeam
Antenna - order the standard EB-2 instead for all other antenna brands)
$53.00
EB-3 1:1 Commercial Baluns 10 kW 7/16 DIN Cal AV Labs
(Special order only - delivery interval min. 90 days - see Array Solutions
W1JR-50-1DIN instead).
$260.00
75 ohm CATV to 50 ohm transformers
AS-50:75-1 50 to 75 ohm UN-UN
CATV Transformer, SO239(UHF) connectors
VHF2-1.5K - 220MHz 1.5 KW Coupler -
includes N connector
$249.00
UHF1-1.5K - 420-450 MHz 1.5KW Coupler - includes N connector
$249.00
UHF2-1.5K - 450-500 MHz 1.5KW Coupler -
commercial band , N connector (Specify Frequency)
Call
ALC-1
This is the best way to shut down an
amplifier after an VSWR alarm
The ALC-1 was designed to be used with those
amplifiers that do not allow their PTT lines to be interrupted while RF is
present. The Alpha 89 is one such amplifier and there may be others. Check
with your amplifier manufacturer if you're not sure.
$49.00
PMC-2 PowerMaster coupler combiner
for 2 couplers
$7.00
Rack Mount for 2 PowerMaster Wattmeters 2U tall x 19 inch rack
$70.00
Rack Mount for 1 PowerMaster (Centered) 2U tall x 19 inch rack
W3NQN Band Pass
filters are the best single band filters you can buy. Each one is hand-made
by W3NQN or by K7MI to W3NQN's specifications. The performance of these
W3NQN design filters, regardless of who assembles them is the same. We
will fill your order using the filters we have on hand when you place your
order. K7MI's filters are those that have been used in our FilterMax units
for years and we are now also shipping them in single band packaging.
From time to time, we
may be out of stock of one or
more of them.
If you are planning a DXpedition or a contest expedition
where you will need these filters, please order in advance and let us know
when you actually need to have them in your possession. We will work with
you to meet your schedule.
The 2kW low pass filters and Broadcast band filters are all made by
W3NQN only and should be considered as "special order" items that are not
likely to be in stock. An interval of several weeks should be expected for
these filters.
BCB Reject - Receiver
Only Filter -
5 shunt resonators to increase rejection above 1.5 Mhz - Receive only (do
not transmit through this filter) W3NQN Filter
SWSD-1 Single Wire Single Direction Beverage Antenna System -
one Transformer and one Termination Box
$79.00
SWSD-1TRAN Single Wire Single Direction Transformer Box
$45.00
SWSD-1TERM Single Wire Single Direction Termination Box
$36.00
PS-12R1A - 12V DC 1 amp LINEAR & REGULATED Power supply for
controller - 6ft cord - RF Quiet - United States 120v AC 60 Hz
$19.00
AS-RXFEP- RF Front End Protector -
protects the preamp and your radio from excessive RF and damage
Highly Recommended Option for RX antennas, includes lightning protection
(Replaces both the ICE 196 and 197 RF limiters/ protectors)
Steel Antenna Masts
are sold in 11 foot and 20-23ft lengths
Note that the per foot
charge is lower for a full length.
**** Out of Stock ****
We have no masts - sorry!
2" OD X 1/4" wall 11 foot - 4130 Chrome Moly 112-118 k psi
$25/ft **** Out of Stock ****
$275.00
2" OD X 1/4" wall ~22 foot- 4130 Chrome Moly 112-118 k psi
$24/ft **** Out of Stock ****
$528.00
2" OD X 1/4" wall 11 foot - 1026 DOM Tube 87 k psi
$19.50/ft **** Out of Stock ****
$214.50
2" OD X 1/4" wall 23 foot - 1026 DOM Tube 87 k psi
$18.50/ft **** Out of Stock ****
$425.50
2 7/8" OD X 0.22 wall 11 foot - 1026 DOM Tube 87 k psi
$26.50/ft *** One 10' mast in stock only ***
$291.00
2 7/8" OD X 0.22 wall ~22 foot - 1026 DOM Tube 87 k psi
$25.50/ft ****
Out of Stock ****
$561.00
Mast Coupler - mates 2-7/8" mast to a 2" chrome molly mast, inc.
hardware
$180.00
Tower
Plates from Custom Metal Works
* These are much stronger
than Rohn *
Order
Description
Price
CMW45/55RP
Heavy Duty Rotator Plate: Hygain, M2, Prosistel
for Rohn 45G or 55G Towers
or other clones such as Nello, etc
$135.00
CMW45/55IBP
Intermediate
Heavy Duty Bearing Plate: Fits
Array Solution's bearings and TB3, TB4 for Rohn 45G or 55G Towers or other
clones such as Nello, etc (Use also as intermediate plate for safety
between rotator and bearing plate - without bearing).
$135.00
CMW45TBP
Heavy Duty Top Bearing Plate: Fits
Array Solution's bearings and TB3, TB4 for Rohn 45G Tower or other
45G clones such as Nello, etc
$230.00
CMW55TBP
Heavy Duty Top Bearing Plate: Fits
Array Solution's bearings and TB3, TB4 for Rohn 55G Towers or other
55G clones such as Nello, etc
RF signal processing equipment, Surge and Lightning Protection and arrestors,
RF filters, Telephone, TV, radio RFI filters, Grounding equipment, RF
switching products, etc Please click on above ICE Title line to visit the
Website and on-line ordering system
** Please note that Array Solutions is not affiliated with ICE aside from
stocking some of their products - If you have placed an order with ICE, you
need to email them for support. **
Note: all OptiBeam Prices subject to change
with the Euro, with the weak dollar it is not possible to give an accurate
price on our website. Hence you must calculate the price from the OptiBeam website as
follows:
Go to www.optibeam.de
and get the Euro Price for your antenna model. Then divide it by 1.19 to get
the Euro Price without VAT added. Now multiply this price by the current
Euro to Dollar conversion bank rate + .04. http://www.xe.com/
(The .04 is added to cover the fees that banks
charge for relatively small transactions like these. The rate on XE.com is the
inter-bank rate).
For example, the OB11-5 is currently priced* at
1699 EURO and we will assume that the bank rate (as shown on XE.com) for the #
of dollars per EURO is $1.31.
So, as in the description above, we do the
following:
1699 / 1.19 = 1428 EURO (without the 19% VAT)
The EURO to dollar rate is the calculated as
follows:
1.31+.04 = $1.35 per EURO
1428 EURO x $1.35 = $1928
$1928 would be the price for the OB11-5 in U.S.
Dollars
This is a very good estimate of the price.
Shipping: All antennas are shipped direct from
Germany and the shipping is not inexpensive although we now have arranged for
Shipping, Customs, and Delivery to your home through UPS Freight Services.
This means that you do not have to go to any airport cargo warehouse to
retrieve your antenna.
Shipping from Germany to the U.S., clearance through U.S. Customs, and then
delivery to you will be estimated when you purchase your antenna. Shipping can
range from about $200 for the smallest antennas to over $1,000 for the largest
antennas.
Customs clearance costs are usually from $100
to $150.
So, if our shipping cost was $350, and say $110
for customs, the total cost for an OB11-5 would be:
$1928 + $350 +$110 = $2388
This is a delivered to your door price - you no
longer have to go to an airport cargo area to pick up your Optibeam antenna.
Please call or email with any questions.
* This estimate calculation was done using
figures valid on August 31, 2010.
Order
Description
Price
MONO BAND OWA Yagis
OB5-6 - Heavy Duty 5 element 6 meter Yagi
$
OB6-6 - Heavy Duty 6 element 6 meter Yagi
(not OWA) includes balun
$
OB5-10 - Heavy Duty 5 element 10 meter Yagi
$
OB5-15 - Heavy Duty 5 element 15 meter Yagi
$
OB5-20 - Heavy Duty 5 element 20 meter Yagi
$
Three Band Single Feedline Yagis
OB6-3M - 20-15-10m small tribander
$
OB7-3 - Heavy Duty 7 element 20-15-10m tribander
$
OB11-3 - Heavy Duty 11 Element 3 Band 20-15-10m
$
OB16-3 - Heavy Duty 16 Element 3 Band 20-15-10m
$
OB10-3W - Heavy Duty 10 Element 3 Band 20-17-15m
$
Four Band Single Feedline Yagis
OB8-4M - 8 element 40-20-15-10m one feedline
$
OB12-4 - 12 element 40-20-15-10m one feedline
$
OB12-4W - 12 element 40 / 20 / 17 / 15M one feedline
$
OB17-4 - 17 element 40-20-15-10m one feedline
$
Five Band Single Feedline Yagis
OBW10-5- Heavy duty wire beam 10 Element 5 Band
20-17-15-12-10m
$
OB9-5 - Heavy duty 9 Element 5 Band 20-17-15-12-10m
$
OB11-5 - Heavy duty 17(11) Element 5 Band 20-17-15-12-10m
$
OB16-5 - Heavy duty 24(16) Element 5 Band 20-17-15-12-10m
Rig Expert
TI-5 -
USB Radio Interface for all modes including Voice operating (voice
memories etc.) enhanced CW with WinKey chip and digital modes using a
personal computer (Replaces the Plus model)
($365 with one cable)
$325.00
Rig Expert Plus-
USB Radio Interface for operating CW with WinKey and digital modes using a
personal computer (Same as TI-5 but without support for voice keying)
(Obsolete model - limited stock - special pricing)
($320 with one cable)
$280.00
Rig Expert Standard-
USB Radio Interface for operating CW and digital modes using a
personal computer
($265 with one cable)
$225.00
Rig Expert Tiny CI-V-1
USB Radio Interface for operating phone, CW and digital modes using a
personal computer.
Prewired for
Icom IC-275, IC-707, IC-718 (if you have an ACC conversion cable which
comes with IC-718), IC-721, IC-725, IC-729, IC-732, IC-735,IC-736,
IC-737, IC-738, IC-746xx (HF), IC-756xx, IC-761, IC-765, IC-775,
IC-780, IC-781,IC-970, IC-7400 (HF), IC-7600, IC-7700, IC-7800
$120.00
Rig Expert Tiny CI-V-2
USB Radio Interface for operating phone, CW and digital modes using a
personal computer.
Prewired for ICOM rigs - ICOM IC-910
$120.00
Rig Expert Tiny CI-V-3
USB Radio Interface for operating phone, CW and digital modes using a
personal computer.
Prewired for ICOM IC-703, IC-706xxxx, IC-718, IC-7000
$120.00
Rig Expert Tiny TTL-1
USB Radio Interface for operating phone, CW and digital modes using a
personal computer.
Prewired for Kenwood rigs - TS-140, TS-450, TS-690, TS-850, TS-950
$120.00
Rig
Expert Tiny TTL-I-1
USB Radio Interface for operating phone, CW and digital modes using a
personal computer.
Prewired for YEASU FT-100, FT-817, FT-857, FT-897
$120.00
Rig
Expert Tiny RS-232-1
USB Radio Interface for operating phone, CW and digital modes using a
personal computer.
Prewired for YEASU FT-1000MP, FT-1000MP Mark V, FT-2000, FTdx-9000D
$120.00
Rig
Expert Tiny RS-232-5
USB Radio Interface for operating phone, CW and digital modes using a
personal computer.
Prewired for Kenwood TS-870, TS-2000 (RS-232-4 is discontinued and
replaced by the RS-232-5)
$120.00
CABLES for Rig Expert TI-5, Plus (discontinued),
and Standard Models
Cable type
Supported transceivers
IC-001
Icom IC-707, IC-275, IC-718 (if you have an ACC Conversion Cable which
comes with your IC-718), IC-721, IC-725, IC-726, IC-728, IC-729,
IC-732, IC-735, IC-736, IC-737, IC-738, IC-756 (all models), IC-761,
IC-765, IC-775, IC-781, IC-970, IC-7600, IC-7700, IC-7800
